4B24 FLORIOPOLIS PEDESTRIAN BRIDGE, CERDA 2 LANE
4B24 FLORIOPOLIS PEDESTRIAN BRIDGE, CERDA
This pedestrian bridge is inspired by the Floriopolis Pedestrian Bridge in Cerda,
Sicilia that was used during the Targa Florio races over many years. Enclosed is a
photo dating back to 1919. This bridge was in close proximity to the pit buildings. It
would seem as if the bridge span was increased at a later stage as the span to
height ratio is much bigger. The bridge has also been made wider. We have chosen
the wider bridge with a longer span as our starting point in designing our bridge.
We believe that we have captured the ambiance of this iconic historic structure and
is proud that we can also give it many more lives on many a slot car trackside. We
believe that this structure can be a valuable contribution to the slot car diorama
world.
Scrutineering:
132. L 548mm W 106mm H 184. Underpass W 245mm H 125mm
143. L 411mm W 79mm H 138. Underpass W 184mm H 94mm
164 L 274mm W 53mm H 92. Underpass W 122mm H 63mm
Instructions:rts_4b24_floriopolis_pedestrian_bridge.pdf
General information:
This is a KIT! it requires assembly and finishing.
Completely assembled and painted Items can be found here--->FINISHED PRODUCTS
Our KITS are available in 3 Scales: 1:32, 1:43 and 1:64
They are made from Super Refined MDF or Basswood.
They come in laser cut sheets and are easy to assemble requiring only Glue (CA, PVA or Wood Glue). They can be finished with Paint, Spray or Stain.
Artwork is laser printed on quality card-stock and any complex shapes are pre-cut for you. ***Note we use a laser to cut the artwork which may leave a very realistic racetrack residue!
Warranty & Spare Parts & Return Policy.
Satisfaction is our goal.
We will replace damaged or defective kits free of charge.
There are no refunds without return of product