RTS 4B18 ROAD AMERICA SPEEDVILLE BRIDGE
Located between Turn 8 and 9 at Road America is the "SPEEDVILLE" Bridge. This is Vehicle Bridge at RA and is quite large. So a scale model of the actual bridge would require an enormous 38 inches by 9 inches of layout space. So we decided to make it a smaller Footbridge and make it span 2 lanes. That way anyone can add this great looking bridge to their layout. Looks great as track entrance arch and infield ornament as well...
132 L 420mm W 82mm H 130mm. Track Clearance 216mm Headroom 60mm
143 L 315mm W 62mm H 98mm. Track Clearance 162mm Headroom 45mm
164 L 210mm W 82mm H 65mm. Track Clearance 108mm Headroom 30mm
Coming Soon.. Nearly the same as the Killarney Bridge..
This is a KIT! it requires assembly and finishing.
Completely assembled and painted Items can be found here--->FINISHED PRODUCTS
Our KITS are available in 3 Scales: 1:32, 1:43 and 1:64
They are made from Super Refined MDF or Basswood.
They come in laser cut sheets and are easy to assemble requiring only Glue (CA, PVA or Wood Glue). They can be finished with Paint, Spray or Stain.
Artwork is laser printed on quality card-stock and any complex shapes are pre-cut for you. ***Note we use a laser to cut the artwork which may leave a very realistic racetrack residue!
Warranty & Spare Parts & Return Policy.
Satisfaction is our goal.
We will replace damaged or defective kits free of charge.
There are no refunds without return of product