- Slot Car Scenery
- >
- Towers
- >
- RTS 2T27 GULF SPOTTER TOWER
RTS 2T27 GULF SPOTTER TOWER
The RTS 2T27 GULF SPOTTER TOWER is a common site at American Super Speedway's. Often perched high above the High Banked Turns, it serves as a Spotter Tower and Camera Nest. Made with MDF and easy to hand paint. The Laser Cut parts are trimmed and ready to assemble. all you need its cold glue (super), paint and about 45 minutes..Includes Printed Artwork Laser cut for a perfect fit!
The RTS 2T27 GULF SPOTTER TOWER is
1/32 100mm long, 100mm wide and 320mm tall
1/43 75mm long, 75mm wide and 250mm tall
1/64 50mm long, 5mm wide and 160mm tall
Instructions:
rts_2t7_sunoco_spotter_tower_daytona_insructions.pdf
General information:
This is a KIT! it requires assembly and finishing.
Completely assembled and painted Items can be found here--->FINISHED PRODUCTS
Our KITS are available in 3 Scales: 1:32, 1:43 and 1:64
They are made from Super Refined MDF or Basswood.
They come in laser cut sheets and are easy to assemble requiring only Glue (CA, PVA or Wood Glue). They can be finished with Paint, Spray or Stain.
Artwork is laser printed on quality card-stock and any complex shapes are pre-cut for you. ***Note we use a laser to cut the artwork which may leave a very realistic racetrack residue!
Warranty & Spare Parts & Return Policy.
Satisfaction is our goal.
We will replace damaged or defective kits free of charge.
There are no refunds without return of product