Store
Any kit fully assembled and painted
Allow 7 to 10 days for this service... You may customize the paint and finish...Just ask..
The Charge includes the extra packaging and insurance to ship a completed kit...
Modern Pit Garage 1/32 Scale Set of 3 with front and rear parking
The Modern Put Garage Set is a Laser cut kit that includes:
3 Pit Buildings
1 Garage floor (all three garages fit on it)
1 Front parking area
1 Rear Parking area
3 Tool Chests
Easy to assemble and Detail. The buildings fit snugly into the base, so that you do not need to glue them. So you can easily detail the interiors of the buildings anytime.
Any number can be special ordered.. so if you need 4 or more please contact me.
Footprint. 28.5 inches wide. 27 inches front to back
Garage area only 28.5 by 7inches
Parking areas are Also 28.5 by 7
Sebring MG Pedestrian Bridge Laser Cut Kit 1/32 2 lane
The legendary road course at Sebring and its 12 hour race, known as the 12 Hours of Sebring, is one of the Triple Crown of Endurance racing. Legends like Ken Myles, Jim Hall, Bruce McLaren, Mario Andretti and so many more have won and lost this grueling race.. This kit is first of several models based on the structures at Sebring. This kit is Laser cut from MDF. Easy to assemble and paint. Total assembly time is approximately 2 hours. Includes both Right Angle and Straight Staircases.
Leguna Seca 4 Lane Pedestrian Bridge Continental Tire Livery
The Iconic Bridge from Laguna Seca ... This is Our Boldest design yet. Similar to the 1/64 bridge we sell, However no printed graphics are used. The letters on the arch are laser cut and pre painted.. Just push them into the Tire arch after the test of the structure is painted and assembled. The Lower valance is also supplied pre painted and engraved. Made from both MDF and Birch Ply. Easy to assemble.. The Stair cases can be configured to fit many layouts..
Riverside Monolith Raceway Sign. Laser Cut Kit 1/32
Riverside the Iconic west coast raceway! Everything about it was EPIC.. including it Sign! Laser Cut easy to assemble.. Logos come on Matte Photo Paper!
Gulf Sign from Monza, Spa, and Brands Hatch.
Gulf the Fuel of racing... The logo is a Badge of Honor.. the Colors mean speed!
Easy to assemble Sign ... Laser cut.. The logo is cut into separate pieces. Very easy to paint!..
I the Graphic is also included on Photo paper.. but painting the sign will give you stunning results..
Tag Heuer VIP Platform 1/32 scale Laser Cut Kit
This VIP Platform looks great on any layout..Especially Yours!. Easy to assemble and paint. The Branding is included on Matte Photo Paper and will also be emailed as PDF so you can Print on the paper of your choice. The structure is Laser Cut MDF and can be assembled in under 10 minutes with PVA or SuperGlue. Like all of our products its made to be sturdy and fun to build and look at!
Footprint 130 x 130mm (5 x 5")
Height 160mm (6")
Watkins Glen Dunlop Starter Platform 1/32 Laser Cut Kit
Watkins Glen.. The site of many legendary races. The landmark Dunlop Starter tower is featured in many Classic photos and the Promo Shot for the Cast of 1966's "Grand Prix". This self assembly kit is easy to assemble and paint. The logo is cut for Birch Veneer. This kit is also available fully assembled and painted.
The Le Mans Pit Collection. Self Assembly Kit 1/32
No race is more legenday than the 24 hours of Le Mans. This kit captures the essence of the Pit Complex. It includes three separate 3 story buildings. Laser cut from MDF and Birch plywood. The walls are engraved with a block pattern and windows and window frame are provided,,, Easy to assemble and paint with a small amount glue, paint and some imagination.. Each building is also sold separately, so you can expand your layout to all 56 stalls..
Firestone 4 Lane Footbridge from Laguna Seca Laser Cut Kit 1/32
Racetrack scenics is proud to release another Signature Product. Based on the Firestone Foot Bridge at Laguna Seca. This covers up to a 4 lane track. (Carrera shown) and is available as laser cut kit made from MDF. A 2 lane version is also available. 1/32 scale.
DRIP the Esso Guy. Double Sided Sign with Structure KIT 1/32 scale
The One. The Only DRIP! The iconic sign from Lemans. Laser cut kit. Double sided (like the real deal) included the optional support structure added in the mid 60's. Drip stands for Happy Motoring! This is easy to paint and assemble. Every piece is laser cut... just paint then assemble for a clean sharp look. Graphics are also included printed on Matte Photo Paper
Sky Sports Camera Nest Laser Cut Kit 1/32
No racetrack is complete without a TV Crew. This camera nest comes with the Camera... All pieces are supplied Laser Cut and Easy too assemble and paint.. Action Figure Sold Seperatly
Specs: Footprint 120 x 120mm (5 x 5"). Height 230mm (9")
Classic Marshall Stand. Pack of 2. Self Assembly Kit 1/32
Marshalls are the unsung heroes of racing. Even today in F1 they remain an important part of driver safety! So give your track a 2 pack of our classic Marshall stands!... Easy to assemble.. They look great with our without finishing. Panels are reversible so you can use them with or without engraving....
Riverside Observation Tower Goodyear Laser Cut Kit 1/32
Originally the control tower at Los Angeles International Airport. The Riverside Goodyear Tower is a racetrack Icon. Featured in the Disney movie "The Love Bug" and hundreds of Television Broadcasts. This kit faithfully models the tower in full 1/32 scale. It stands 27 inches high and has a footprint of 11 by 11 inches. It is laser cut from MDF and includes the Flagpoles and cable for Hoist. This is a fairly easy build as most parts snap together. 450 parts. Assemble with Glue and Paint. All logos and signage are included, also made of Birch Ply and easy to paint and detail. Assembly Time is 10-15 hours. Includes a link to video filled with Instructions and Finishing tips. I can provide a finished model by request. Please email for a quote.
Riverside Billboard Collection 1 Goodyear and Camel Gt Kit 1/32
The Iconic billboards of Riverside faithfully recreated in 1/32 scale. Laser cut kit easy to paint and assemble. The Logos are Cut from Birch Ply and Easy to paint as they are seperate from the Billboard. Just paint and place in the Billboard. This a Solid wood kit! no stickers
Esso sign Large Double Sided Kit 1/32 Scale
ESSO ... Double Sided Billboard Kit. All parts are Laser Cut... easy to paint and assemble.. The Location for the Logos are laser engraved for easy fit.. ESSO Means Happy Motoring... Stands 9.5 inches High and 10 inches wide.
Sebring MG Pedestrian Bridge Laser Cut Kit 1/32 4 lane
Photos available Shortly. The legendary road course at Sebring and its 12 hour race, known as the 12 Hours of Sebring, is one of the Triple Crown of Endurance racing. Legends like Ken Myles, Jim Hall, Bruce McLaren, Mario Andretti and so many more have won and lost this grueling race.. This kit is first of several models based on the structures at Sebring. This kit is Laser cut from MDF. Easy to assemble and paint. Total assembly time is approximately 2 hours. Includes both Right Angle and Straight Staircases.
Chevron Double Sided Sign Kit
Chevron sign. a common site at Grand Prix tracks in the 70's. Spa Nurburgring to name a few... this kit captures the spirit of the 70's. big and bold.. easy to assemble and paint.. Made from Baltic Birch plywood... Built to Last, Built for Speed...
Fuel Depot, Helipad, Media Tower. Laser Cut Kit. 1/32
Slot cars need Fuel too... This stunning kit is made from Laser cut MDF and can easily be adapted to a Water Tower, VIP Fan Observation Deck or Helipad. The fuel tank (a can) is not included...
Marlboro F1 Style Billboard 1996 1/32 Laser Cut Kit
The Iconic F1 Sponsor Marlboro Billboard. Now Available in Kit Form
Marchal Grandstand Kit Laser cut 1/32 scale Now with Wall engravings
The S.E.V. Marchal CAT logo has been a fixture of racetrack advertising since the beginning. This Classic grandstand pays tribute. Laser cut from MDF and Basswood and ready to assemble using glue, paint and Imagination. (new photos coming soon)
Footprint 240 X 200mm (9½ x 8")
Height 175mm (7")
Pirelli Covered Grandstand. Laser Cut Kit 1/32
A classic covered grandstand, that was a feature of many racetracks of the past. Autoracing took many cues from Horse Racing and Equestrian venues, this is just one example. This Kit is Laser Cut from Real Wood. Easy to assemble. Can be made with the Staircase on either side..
Pirelli Branded.. Other sponsors are available by special request!.
Lighting Tower Kit Single Head
Laser Cut easy to assemble Lighting Pylon. Light up your track with these awesome speedway style Light Towers! Assemble with glue and paint. 3 self adhesive Led strips and wire are included. Requires a 12vdc Power Supply Sold Separately.
Goodyear 4 Lane Bridge Laser Cut Kit 1/32
4 lane bridge with a inside span of 17.5 inches and 4 inch overhead clearance. Perfect for any layout... Inspired by the pedestrian bridges often seen at American Tracks. Easy to assemble and paint.. includes the logo cut and engraved in Birch veneer.
Lighting Pylon Dual Head Kit 1/32
Racing under the lights! the Dual head Pylon is Laser Cut from Real wood and ready to assemble with glue and paint. Includes 3 self stick LED Strips and wire. Requires a 12vdc power source.
Sunoco Tower Laser Cut Kit 1/32
The Sunoco sign is a common site at American Super Speedway's. Often perched high above the High Banked Turns, it serves as a Spotter Tower and Camera Nest. Made with real wood and easy to hand paint. The Laser Cut parts are trimmed and ready to assemble. all you need its cold glue (super), paint and about 45 minutes..
Deluxe Pit Building Garage Kit 1/32 Scale
Every track needs a Pit Lane.. this includes a Hospitality level. Laser Cut from MDF And Basswood and easy to assemble with glue and paint. This now Features Engraved walls on both in inside and outside.. New Photos coming soon
Footprint: 236 x 190mm (9½ x 5")
Height: 190mm (7½")
12VDC Power Supply for Lighted Products
Required Power Supply for LED Lighted Products. Can power up to 12 Lighted Structures..
Wire for layout not included. I used Common Doorbell wire for my layout...
Dunlop Scoreboard Tower Kit with LED kit
The legendary scoreboard leader tower... this kit include LED Strips and wiring. Requires a 12vdc Power Supply. Laser cut from Birch Plywood. Easy to assemble with cold glue, paint and about 60 minutes.. Also available Fully assembled.
Elevated Car Stand. 3 pack kit 1/32 Laser Cut Kit
A classic way to display slot cars on your track with this trio of car stands. Easy to assemble Laser cut form real wood. Cars not included.
Texaco Fan Platform from Nurburgring 1/32 Laser Cut Kit
The German Grand Prix. Back when they raced the full "Green Hell".. Had many iconic structures.. The Texaco Fan Platform was always a favorite of the locals... No it can be a favorite on your track. Laser Cut and Easy to assemble with cold glue and paint. the Logos are included and cut into easy to paint sections...
Shell Pylon Nurburgring Tribute Edition 1/32 scale
The Classic.. What would the Green Hell be without the Shell Pylon.. Originally put up to advertise the chemical company Leuna.. The Shell Pylon remains... This is an easily assembled kit cut from Laser Cut MDF and can be backlit by adding Acrylic Letters..
Specs: Footprint 86 X 86mm (3½ x 3½") H 345mm (14")
DHL Sign Kit (2 signs) 1/32
A key sponsor of Formula 1 and logistic partner for nearly all motor sports. The DHL Logo is everywhere. Laser Cut, ready too paint and assemble.. 2 complete signs are included in the kit. The Logo is laser Cut from Basswood and is also included printed on Matte Photo Paper